Class MuoviConstants

Constants and static helper methods shared between MuoviSingleProbe (direct Wi-Fi) and MOSAIC.Components.Devices.Muovi (SyncStation multi-probe) blocks.

Inheritance
MuoviConstants
Namespace: MOSAIC.Components.Devices.Muovi
Assembly: MOSAIC.dll
Syntax
public static class MuoviConstants
Remarks

All values are derived from the OT Bioelettronica Muovi protocol specification (v2.4 for single-probe, v2.8 for SyncStation). Refer to the manufacturer documentation at https://otbioelettronica.it/en/download/#55-171-wpfd-muovi for full details.

Fields

ChannelsPerProbeRaw

Total raw columns per probe in a data frame: 32 electrode + 4 IMU + 2 accessory channels.

Declaration
public const int ChannelsPerProbeRaw = 38
Field Value
Type Description
int

EegConversion

Conversion factor for EEG mode, in microvolts per bit.

Declaration
public const double EegConversion = 0.286
Field Value
Type Description
double

ElectrodeChannels

Number of electrode channels per Muovi probe (4 × 8 grid).

Declaration
public const int ElectrodeChannels = 32
Field Value
Type Description
int

EmgConversion

Conversion factor for EMG standard gain mode (gain ×8). Multiply the raw short sample by this value to obtain normalised units.

Declaration
public const double EmgConversion = 3.0517578125E-05
Field Value
Type Description
double

EmgLowGainConversion

Conversion factor for EMG low-gain mode (gain ×4), in millivolts per bit.

Declaration
public const double EmgLowGainConversion = 0.000572
Field Value
Type Description
double

ImuChannels

Number of IMU quaternion channels per probe (W, X, Y, Z).

Declaration
public const int ImuChannels = 4
Field Value
Type Description
int

NominalRateEeg

Nominal sample rate in EEG mode, in Hz.

Declaration
public const int NominalRateEeg = 500
Field Value
Type Description
int

NominalRateEmg

Nominal sample rate in EMG mode (both standard and low-gain), in Hz.

Declaration
public const int NominalRateEmg = 2000
Field Value
Type Description
int

Methods

BuildConfigByte(MuoviSignalMode)

Builds the single-byte configuration value for the direct Wi-Fi protocol (single-probe mode, v2.4).

Declaration
public static byte BuildConfigByte(MuoviSignalMode mode)
Parameters
Type Name Description
MuoviSignalMode mode

The desired signal acquisition mode.

Returns
Type Description
byte

A byte encoding [0][0][0][0][EMG/EEG][MODE1][MODE0][GO=1] as defined in the OT Bioelettronica single-probe protocol.

Remarks
ModeConfig byte
Emg0x09
EmgLowGain0x0B
Eeg0x01

ChannelPrefix(MuoviSignalMode)

Returns the human-readable channel label prefix for the specified signal mode.

Declaration
public static string ChannelPrefix(MuoviSignalMode mode)
Parameters
Type Name Description
MuoviSignalMode mode

The signal acquisition mode.

Returns
Type Description
string

"EEG" for Eeg, "EMG" otherwise.

ConversionFactor(MuoviSignalMode)

Returns the ADC-to-physical-unit conversion factor for the specified mode.

Declaration
public static double ConversionFactor(MuoviSignalMode mode)
Parameters
Type Name Description
MuoviSignalMode mode

The signal acquisition mode.

Returns
Type Description
double

The conversion multiplier to apply to each raw short sample.

Crc8(byte[], int)

Computes an 8-bit CRC over data[0..len] (inclusive). Used by both the SyncStation and single-probe protocols to validate configuration packets.

Declaration
public static byte Crc8(byte[] data, int len)
Parameters
Type Name Description
byte[] data

The byte array to checksum.

int len

The index of the last byte to include (inclusive). For example, pass pos - 1 to checksum bytes 0 through pos - 1.

Returns
Type Description
byte

The CRC-8 value as a single byte.

NominalRate(MuoviSignalMode)

Returns the nominal sample rate for the specified mode.

Declaration
public static int NominalRate(MuoviSignalMode mode)
Parameters
Type Name Description
MuoviSignalMode mode

The signal acquisition mode.

Returns
Type Description
int

2 000 for EMG modes, 500 for EEG.

Search documentation

Start typing to search the documentation.