Class BlenderArm
Sends control values over UDP to a Blender arm model for real-time 3D visualisation.
JSON configuration
Use these block entries inside a pipeline configuration. Input names must match other blocks in that pipeline; device addresses and file paths must match your setup.
JSON configuration:
{
"Blender": {
"Type": "BlenderArm",
"Inputs": [ "ControlAlgorithm" ],
"Params": [ "127.0.0.1", 5005 ]
}
}
Params:
| Index | Description |
|---|---|
| 0 | HostIp (string) — target UDP host IP address. |
| 1 | Port (int) — target UDP port number. |
How Type, Inputs and Params work · Block catalogue and parameter reference
Implements
Inherited Members
Namespace: MOSAIC.Models.Streaming
Assembly: MOSAIC.dll
Syntax
public sealed class BlenderArm : BaseBlock, INotifyPropertyChanged, INotifyPropertyChanging, ISubscriber, IPublisher, IBaseBlockProps, IJsonExportable, IDisposable, IAsyncDisposable
Remarks
Overview: Converts the DegreesOfActuation dictionary from an upstream
ControlAlgorithm into a 9-element vector and sends
it as an ASCII-encoded JSON array over UDP to a Blender Python script (3DHands_left.py).
Vector layout:
[ th_flex, th_rot, index, middle, ring, little, wr_flex_ext, wr_uln_rad, wr_sup_pron ]
[0..1] [0..1] [0..1] [0..1] [0..1] [0..1] [-1..1] [-1..1] [-1..1]
Finger values are scaled from [0, 100] → [0, 1]. Wrist values are scaled from [0, 100] → [−1, 1]. Wrist pronation/supination is additionally negated.
Connection: Call Connect() to open the UDP socket. The block silently drops data if not connected. Call Disconnect() or Reconnect() to manage the socket lifecycle.
CSV logging: This block publishes a Dictionary<DegreesOfActuation, double>
which CsvDumper does not support. The 9-element command vector is published
for downstream consumption; logging should be configured on the upstream ControlAlgorithm
or a downstream block that receives the vector.
Constructors
BlenderArm(string, double, string, int)
Initializes a new BlenderArm block.
Declaration
public BlenderArm(string name = "BlenderArm", double desiredRate = 0, string hostIp = "127.0.0.1", int port = 5005)
Parameters
| Type | Name | Description |
|---|---|---|
| string | name | Display name. |
| double | desiredRate | Processing rate in Hz (typically inherited). |
| string | hostIp | Target UDP host IP address. |
| int | port | Target UDP port number. |
Fields
_blenderArmCmd
Preallocated 9-element command vector.
Declaration
private Vector<double> _blenderArmCmd
Field Value
| Type | Description |
|---|---|
| Vector<double> |
_hostIp
Target host IP address.
Declaration
[ObservableProperty]
private string _hostIp
Field Value
| Type | Description |
|---|---|
| string |
_index
Current index finger value [0, 1].
Declaration
[ObservableProperty]
private double _index
Field Value
| Type | Description |
|---|---|
| double |
_isConnected
Whether the UDP connection has been established.
Declaration
[ObservableProperty]
private bool _isConnected
Field Value
| Type | Description |
|---|---|
| bool |
_lastCommand
Last command string sent (for UI display).
Declaration
[ObservableProperty]
private string _lastCommand
Field Value
| Type | Description |
|---|---|
| string |
_little
Current little finger value [0, 1].
Declaration
[ObservableProperty]
private double _little
Field Value
| Type | Description |
|---|---|
| double |
_messageCount
Total messages sent.
Declaration
[ObservableProperty]
private long _messageCount
Field Value
| Type | Description |
|---|---|
| long |
_middle
Current middle finger value [0, 1].
Declaration
[ObservableProperty]
private double _middle
Field Value
| Type | Description |
|---|---|
| double |
_port
Target UDP port.
Declaration
[ObservableProperty]
private int _port
Field Value
| Type | Description |
|---|---|
| int |
_ring
Current ring finger value [0, 1].
Declaration
[ObservableProperty]
private double _ring
Field Value
| Type | Description |
|---|---|
| double |
_thumbFlexion
Current thumb flexion value [0, 1].
Declaration
[ObservableProperty]
private double _thumbFlexion
Field Value
| Type | Description |
|---|---|
| double |
_thumbRotation
Current thumb rotation value [0, 1].
Declaration
[ObservableProperty]
private double _thumbRotation
Field Value
| Type | Description |
|---|---|
| double |
_udpClient
UDP client for sending command strings to Blender.
Declaration
private UdpClient _udpClient
Field Value
| Type | Description |
|---|---|
| UdpClient |
_viz
Optional visualization bundle. Set by the ViewModel so the block can feed data to all monitors in one call.
Declaration
private BlockVisualization? _viz
Field Value
| Type | Description |
|---|---|
| BlockVisualization |
_wristFlexExt
Current wrist flexion/extension value [−1, 1].
Declaration
[ObservableProperty]
private double _wristFlexExt
Field Value
| Type | Description |
|---|---|
| double |
_wristSupPron
Current wrist supination/pronation value [−1, 1].
Declaration
[ObservableProperty]
private double _wristSupPron
Field Value
| Type | Description |
|---|---|
| double |
_wristUlnRad
Current wrist ulnar/radial value [−1, 1].
Declaration
[ObservableProperty]
private double _wristUlnRad
Field Value
| Type | Description |
|---|---|
| double |
Properties
HostIp
Target host IP address.
Declaration
[ExcludeFromCodeCoverage]
public string HostIp { get; set; }
Property Value
| Type | Description |
|---|---|
| string |
Index
Current index finger value [0, 1].
Declaration
[ExcludeFromCodeCoverage]
public double Index { get; set; }
Property Value
| Type | Description |
|---|---|
| double |
IsConnected
Whether the UDP connection has been established.
Declaration
[ExcludeFromCodeCoverage]
public bool IsConnected { get; set; }
Property Value
| Type | Description |
|---|---|
| bool |
JsonTypeName
Block type identifier for JSON serialization. Override for a custom name.
Declaration
protected override string JsonTypeName { get; }
Property Value
| Type | Description |
|---|---|
| string |
Overrides
LastCommand
Last command string sent (for UI display).
Declaration
[ExcludeFromCodeCoverage]
public string LastCommand { get; set; }
Property Value
| Type | Description |
|---|---|
| string |
Little
Current little finger value [0, 1].
Declaration
[ExcludeFromCodeCoverage]
public double Little { get; set; }
Property Value
| Type | Description |
|---|---|
| double |
MessageCount
Total messages sent.
Declaration
[ExcludeFromCodeCoverage]
public long MessageCount { get; set; }
Property Value
| Type | Description |
|---|---|
| long |
Middle
Current middle finger value [0, 1].
Declaration
[ExcludeFromCodeCoverage]
public double Middle { get; set; }
Property Value
| Type | Description |
|---|---|
| double |
Port
Target UDP port.
Declaration
[ExcludeFromCodeCoverage]
public int Port { get; set; }
Property Value
| Type | Description |
|---|---|
| int |
Ring
Current ring finger value [0, 1].
Declaration
[ExcludeFromCodeCoverage]
public double Ring { get; set; }
Property Value
| Type | Description |
|---|---|
| double |
ThumbFlexion
Current thumb flexion value [0, 1].
Declaration
[ExcludeFromCodeCoverage]
public double ThumbFlexion { get; set; }
Property Value
| Type | Description |
|---|---|
| double |
ThumbRotation
Current thumb rotation value [0, 1].
Declaration
[ExcludeFromCodeCoverage]
public double ThumbRotation { get; set; }
Property Value
| Type | Description |
|---|---|
| double |
Visualization
This block's visualization, or null when it has none.
Declaration
protected override BlockVisualization? Visualization { get; }
Property Value
| Type | Description |
|---|---|
| BlockVisualization |
Overrides
Remarks
Blocks own their scope as a public Viz property rather than inheriting one, so the
base class has no way to reach it. Overriding this is what lets the rate below be wired up
automatically. With correct publication metadata, the bundle derives the time axis for
one vector per publication or fixed-size contiguous sample packets from the feed shape.
When a plot needs a rate that publication frequency and feed shape cannot express (for
example, variable-sized packets or overlapping windows), declare it with
Viz.UpdateSignalRate. An explicit declaration wins over the derived rate. A block
with several bundles must configure each one; this hook exposes only one bundle.
Viz
Live plot for this block. Assigned by the ViewModel, which owns the scope.
Declaration
public BlockVisualization? Viz { get; set; }
Property Value
| Type | Description |
|---|---|
| BlockVisualization |
Remarks
Setting this re-pushes the publish rate: the rate is normally pushed when it changes, which for these blocks happens during construction — before the ViewModel has handed over the scope — so without this the scope would never learn its time base.
WristFlexExt
Current wrist flexion/extension value [−1, 1].
Declaration
[ExcludeFromCodeCoverage]
public double WristFlexExt { get; set; }
Property Value
| Type | Description |
|---|---|
| double |
WristSupPron
Current wrist supination/pronation value [−1, 1].
Declaration
[ExcludeFromCodeCoverage]
public double WristSupPron { get; set; }
Property Value
| Type | Description |
|---|---|
| double |
WristUlnRad
Current wrist ulnar/radial value [−1, 1].
Declaration
[ExcludeFromCodeCoverage]
public double WristUlnRad { get; set; }
Property Value
| Type | Description |
|---|---|
| double |
Methods
ConfigureInput(IServiceProvider, JsonModel)
Creates a BlenderArm from a JSON pipeline definition.
Declaration
public static BlenderArm ConfigureInput(IServiceProvider sp, JsonModel m)
Parameters
| Type | Name | Description |
|---|---|---|
| IServiceProvider | sp | Service provider for dependency injection. |
| JsonModel | m | JSON model. See the class-level example for |
Returns
| Type | Description |
|---|---|
| BlenderArm | A configured BlenderArm instance. |
Exceptions
| Type | Condition |
|---|---|
| ArgumentException | Thrown if the configured port is invalid. |
Connect()
Declaration
public void Connect()
Disconnect()
Closes and disposes the UDP socket.
Declaration
public void Disconnect()
Dispose()
Disposes visualization, disconnects UDP, and releases base class resources.
Declaration
public override void Dispose()
Overrides
GetDoa(Dictionary<DegreesOfActuation, double>, DegreesOfActuation)
Safely retrieves a DOA value from the dictionary, returning 0 if not present.
Declaration
private static double GetDoa(Dictionary<DegreesOfActuation, double> dict, DegreesOfActuation key)
Parameters
| Type | Name | Description |
|---|---|---|
| Dictionary<DegreesOfActuation, double> | dict | |
| DegreesOfActuation | key |
Returns
| Type | Description |
|---|---|
| double |
GetJsonParams()
Block-specific parameters for JSON. Override to provide custom parameters.
Declaration
protected override IReadOnlyList<object>? GetJsonParams()
Returns
| Type | Description |
|---|---|
| IReadOnlyList<object> | The values for Params, in the order this block's |
Overrides
OnHostIpChanged(string)
Executes the logic for when HostIp just changed.
Declaration
private void OnHostIpChanged(string value)
Parameters
| Type | Name | Description |
|---|---|---|
| string | value | The new property value that was set. |
Remarks
This method is invoked right after the value of HostIp is changed.
OnHostIpChanged(string?, string)
Executes the logic for when HostIp just changed.
Declaration
private void OnHostIpChanged(string? oldValue, string newValue)
Parameters
| Type | Name | Description |
|---|---|---|
| string | oldValue | The previous property value that was replaced. |
| string | newValue | The new property value that was set. |
Remarks
This method is invoked right after the value of HostIp is changed.
OnHostIpChanging(string)
Executes the logic for when HostIp is changing.
Declaration
private void OnHostIpChanging(string value)
Parameters
| Type | Name | Description |
|---|---|---|
| string | value | The new property value being set. |
Remarks
This method is invoked right before the value of HostIp is changed.
OnHostIpChanging(string?, string)
Executes the logic for when HostIp is changing.
Declaration
private void OnHostIpChanging(string? oldValue, string newValue)
Parameters
| Type | Name | Description |
|---|---|---|
| string | oldValue | The previous property value that is being replaced. |
| string | newValue | The new property value being set. |
Remarks
This method is invoked right before the value of HostIp is changed.
OnIndexChanged(double)
Executes the logic for when Index just changed.
Declaration
private void OnIndexChanged(double value)
Parameters
| Type | Name | Description |
|---|---|---|
| double | value | The new property value that was set. |
Remarks
This method is invoked right after the value of Index is changed.
OnIndexChanged(double, double)
Executes the logic for when Index just changed.
Declaration
private void OnIndexChanged(double oldValue, double newValue)
Parameters
| Type | Name | Description |
|---|---|---|
| double | oldValue | The previous property value that was replaced. |
| double | newValue | The new property value that was set. |
Remarks
This method is invoked right after the value of Index is changed.
OnIndexChanging(double)
Executes the logic for when Index is changing.
Declaration
private void OnIndexChanging(double value)
Parameters
| Type | Name | Description |
|---|---|---|
| double | value | The new property value being set. |
Remarks
This method is invoked right before the value of Index is changed.
OnIndexChanging(double, double)
Executes the logic for when Index is changing.
Declaration
private void OnIndexChanging(double oldValue, double newValue)
Parameters
| Type | Name | Description |
|---|---|---|
| double | oldValue | The previous property value that is being replaced. |
| double | newValue | The new property value being set. |
Remarks
This method is invoked right before the value of Index is changed.
OnIsConnectedChanged(bool)
Executes the logic for when IsConnected just changed.
Declaration
private void OnIsConnectedChanged(bool value)
Parameters
| Type | Name | Description |
|---|---|---|
| bool | value | The new property value that was set. |
Remarks
This method is invoked right after the value of IsConnected is changed.
OnIsConnectedChanged(bool, bool)
Executes the logic for when IsConnected just changed.
Declaration
private void OnIsConnectedChanged(bool oldValue, bool newValue)
Parameters
| Type | Name | Description |
|---|---|---|
| bool | oldValue | The previous property value that was replaced. |
| bool | newValue | The new property value that was set. |
Remarks
This method is invoked right after the value of IsConnected is changed.
OnIsConnectedChanging(bool)
Executes the logic for when IsConnected is changing.
Declaration
private void OnIsConnectedChanging(bool value)
Parameters
| Type | Name | Description |
|---|---|---|
| bool | value | The new property value being set. |
Remarks
This method is invoked right before the value of IsConnected is changed.
OnIsConnectedChanging(bool, bool)
Executes the logic for when IsConnected is changing.
Declaration
private void OnIsConnectedChanging(bool oldValue, bool newValue)
Parameters
| Type | Name | Description |
|---|---|---|
| bool | oldValue | The previous property value that is being replaced. |
| bool | newValue | The new property value being set. |
Remarks
This method is invoked right before the value of IsConnected is changed.
OnLastCommandChanged(string)
Executes the logic for when LastCommand just changed.
Declaration
private void OnLastCommandChanged(string value)
Parameters
| Type | Name | Description |
|---|---|---|
| string | value | The new property value that was set. |
Remarks
This method is invoked right after the value of LastCommand is changed.
OnLastCommandChanged(string?, string)
Executes the logic for when LastCommand just changed.
Declaration
private void OnLastCommandChanged(string? oldValue, string newValue)
Parameters
| Type | Name | Description |
|---|---|---|
| string | oldValue | The previous property value that was replaced. |
| string | newValue | The new property value that was set. |
Remarks
This method is invoked right after the value of LastCommand is changed.
OnLastCommandChanging(string)
Executes the logic for when LastCommand is changing.
Declaration
private void OnLastCommandChanging(string value)
Parameters
| Type | Name | Description |
|---|---|---|
| string | value | The new property value being set. |
Remarks
This method is invoked right before the value of LastCommand is changed.
OnLastCommandChanging(string?, string)
Executes the logic for when LastCommand is changing.
Declaration
private void OnLastCommandChanging(string? oldValue, string newValue)
Parameters
| Type | Name | Description |
|---|---|---|
| string | oldValue | The previous property value that is being replaced. |
| string | newValue | The new property value being set. |
Remarks
This method is invoked right before the value of LastCommand is changed.
OnLittleChanged(double)
Executes the logic for when Little just changed.
Declaration
private void OnLittleChanged(double value)
Parameters
| Type | Name | Description |
|---|---|---|
| double | value | The new property value that was set. |
Remarks
This method is invoked right after the value of Little is changed.
OnLittleChanged(double, double)
Executes the logic for when Little just changed.
Declaration
private void OnLittleChanged(double oldValue, double newValue)
Parameters
| Type | Name | Description |
|---|---|---|
| double | oldValue | The previous property value that was replaced. |
| double | newValue | The new property value that was set. |
Remarks
This method is invoked right after the value of Little is changed.
OnLittleChanging(double)
Executes the logic for when Little is changing.
Declaration
private void OnLittleChanging(double value)
Parameters
| Type | Name | Description |
|---|---|---|
| double | value | The new property value being set. |
Remarks
This method is invoked right before the value of Little is changed.
OnLittleChanging(double, double)
Executes the logic for when Little is changing.
Declaration
private void OnLittleChanging(double oldValue, double newValue)
Parameters
| Type | Name | Description |
|---|---|---|
| double | oldValue | The previous property value that is being replaced. |
| double | newValue | The new property value being set. |
Remarks
This method is invoked right before the value of Little is changed.
OnMessageCountChanged(long)
Executes the logic for when MessageCount just changed.
Declaration
private void OnMessageCountChanged(long value)
Parameters
| Type | Name | Description |
|---|---|---|
| long | value | The new property value that was set. |
Remarks
This method is invoked right after the value of MessageCount is changed.
OnMessageCountChanged(long, long)
Executes the logic for when MessageCount just changed.
Declaration
private void OnMessageCountChanged(long oldValue, long newValue)
Parameters
| Type | Name | Description |
|---|---|---|
| long | oldValue | The previous property value that was replaced. |
| long | newValue | The new property value that was set. |
Remarks
This method is invoked right after the value of MessageCount is changed.
OnMessageCountChanging(long)
Executes the logic for when MessageCount is changing.
Declaration
private void OnMessageCountChanging(long value)
Parameters
| Type | Name | Description |
|---|---|---|
| long | value | The new property value being set. |
Remarks
This method is invoked right before the value of MessageCount is changed.
OnMessageCountChanging(long, long)
Executes the logic for when MessageCount is changing.
Declaration
private void OnMessageCountChanging(long oldValue, long newValue)
Parameters
| Type | Name | Description |
|---|---|---|
| long | oldValue | The previous property value that is being replaced. |
| long | newValue | The new property value being set. |
Remarks
This method is invoked right before the value of MessageCount is changed.
OnMiddleChanged(double)
Executes the logic for when Middle just changed.
Declaration
private void OnMiddleChanged(double value)
Parameters
| Type | Name | Description |
|---|---|---|
| double | value | The new property value that was set. |
Remarks
This method is invoked right after the value of Middle is changed.
OnMiddleChanged(double, double)
Executes the logic for when Middle just changed.
Declaration
private void OnMiddleChanged(double oldValue, double newValue)
Parameters
| Type | Name | Description |
|---|---|---|
| double | oldValue | The previous property value that was replaced. |
| double | newValue | The new property value that was set. |
Remarks
This method is invoked right after the value of Middle is changed.
OnMiddleChanging(double)
Executes the logic for when Middle is changing.
Declaration
private void OnMiddleChanging(double value)
Parameters
| Type | Name | Description |
|---|---|---|
| double | value | The new property value being set. |
Remarks
This method is invoked right before the value of Middle is changed.
OnMiddleChanging(double, double)
Executes the logic for when Middle is changing.
Declaration
private void OnMiddleChanging(double oldValue, double newValue)
Parameters
| Type | Name | Description |
|---|---|---|
| double | oldValue | The previous property value that is being replaced. |
| double | newValue | The new property value being set. |
Remarks
This method is invoked right before the value of Middle is changed.
OnPortChanged(int)
Executes the logic for when Port just changed.
Declaration
private void OnPortChanged(int value)
Parameters
| Type | Name | Description |
|---|---|---|
| int | value | The new property value that was set. |
Remarks
This method is invoked right after the value of Port is changed.
OnPortChanged(int, int)
Executes the logic for when Port just changed.
Declaration
private void OnPortChanged(int oldValue, int newValue)
Parameters
| Type | Name | Description |
|---|---|---|
| int | oldValue | The previous property value that was replaced. |
| int | newValue | The new property value that was set. |
Remarks
This method is invoked right after the value of Port is changed.
OnPortChanging(int)
Executes the logic for when Port is changing.
Declaration
private void OnPortChanging(int value)
Parameters
| Type | Name | Description |
|---|---|---|
| int | value | The new property value being set. |
Remarks
This method is invoked right before the value of Port is changed.
OnPortChanging(int, int)
Executes the logic for when Port is changing.
Declaration
private void OnPortChanging(int oldValue, int newValue)
Parameters
| Type | Name | Description |
|---|---|---|
| int | oldValue | The previous property value that is being replaced. |
| int | newValue | The new property value being set. |
Remarks
This method is invoked right before the value of Port is changed.
OnReceive(object, object)
Converts the incoming DOA dictionary to a 9-element command vector, sends it over UDP, and publishes it downstream.
Declaration
protected override void OnReceive(object sender, object data)
Parameters
| Type | Name | Description |
|---|---|---|
| object | sender | The upstream block (typically ControlAlgorithm). |
| object | data | Expected to be a |
Overrides
OnRingChanged(double)
Executes the logic for when Ring just changed.
Declaration
private void OnRingChanged(double value)
Parameters
| Type | Name | Description |
|---|---|---|
| double | value | The new property value that was set. |
Remarks
This method is invoked right after the value of Ring is changed.
OnRingChanged(double, double)
Executes the logic for when Ring just changed.
Declaration
private void OnRingChanged(double oldValue, double newValue)
Parameters
| Type | Name | Description |
|---|---|---|
| double | oldValue | The previous property value that was replaced. |
| double | newValue | The new property value that was set. |
Remarks
This method is invoked right after the value of Ring is changed.
OnRingChanging(double)
Executes the logic for when Ring is changing.
Declaration
private void OnRingChanging(double value)
Parameters
| Type | Name | Description |
|---|---|---|
| double | value | The new property value being set. |
Remarks
This method is invoked right before the value of Ring is changed.
OnRingChanging(double, double)
Executes the logic for when Ring is changing.
Declaration
private void OnRingChanging(double oldValue, double newValue)
Parameters
| Type | Name | Description |
|---|---|---|
| double | oldValue | The previous property value that is being replaced. |
| double | newValue | The new property value being set. |
Remarks
This method is invoked right before the value of Ring is changed.
OnThumbFlexionChanged(double)
Executes the logic for when ThumbFlexion just changed.
Declaration
private void OnThumbFlexionChanged(double value)
Parameters
| Type | Name | Description |
|---|---|---|
| double | value | The new property value that was set. |
Remarks
This method is invoked right after the value of ThumbFlexion is changed.
OnThumbFlexionChanged(double, double)
Executes the logic for when ThumbFlexion just changed.
Declaration
private void OnThumbFlexionChanged(double oldValue, double newValue)
Parameters
| Type | Name | Description |
|---|---|---|
| double | oldValue | The previous property value that was replaced. |
| double | newValue | The new property value that was set. |
Remarks
This method is invoked right after the value of ThumbFlexion is changed.
OnThumbFlexionChanging(double)
Executes the logic for when ThumbFlexion is changing.
Declaration
private void OnThumbFlexionChanging(double value)
Parameters
| Type | Name | Description |
|---|---|---|
| double | value | The new property value being set. |
Remarks
This method is invoked right before the value of ThumbFlexion is changed.
OnThumbFlexionChanging(double, double)
Executes the logic for when ThumbFlexion is changing.
Declaration
private void OnThumbFlexionChanging(double oldValue, double newValue)
Parameters
| Type | Name | Description |
|---|---|---|
| double | oldValue | The previous property value that is being replaced. |
| double | newValue | The new property value being set. |
Remarks
This method is invoked right before the value of ThumbFlexion is changed.
OnThumbRotationChanged(double)
Executes the logic for when ThumbRotation just changed.
Declaration
private void OnThumbRotationChanged(double value)
Parameters
| Type | Name | Description |
|---|---|---|
| double | value | The new property value that was set. |
Remarks
This method is invoked right after the value of ThumbRotation is changed.
OnThumbRotationChanged(double, double)
Executes the logic for when ThumbRotation just changed.
Declaration
private void OnThumbRotationChanged(double oldValue, double newValue)
Parameters
| Type | Name | Description |
|---|---|---|
| double | oldValue | The previous property value that was replaced. |
| double | newValue | The new property value that was set. |
Remarks
This method is invoked right after the value of ThumbRotation is changed.
OnThumbRotationChanging(double)
Executes the logic for when ThumbRotation is changing.
Declaration
private void OnThumbRotationChanging(double value)
Parameters
| Type | Name | Description |
|---|---|---|
| double | value | The new property value being set. |
Remarks
This method is invoked right before the value of ThumbRotation is changed.
OnThumbRotationChanging(double, double)
Executes the logic for when ThumbRotation is changing.
Declaration
private void OnThumbRotationChanging(double oldValue, double newValue)
Parameters
| Type | Name | Description |
|---|---|---|
| double | oldValue | The previous property value that is being replaced. |
| double | newValue | The new property value being set. |
Remarks
This method is invoked right before the value of ThumbRotation is changed.
OnWristFlexExtChanged(double)
Executes the logic for when WristFlexExt just changed.
Declaration
private void OnWristFlexExtChanged(double value)
Parameters
| Type | Name | Description |
|---|---|---|
| double | value | The new property value that was set. |
Remarks
This method is invoked right after the value of WristFlexExt is changed.
OnWristFlexExtChanged(double, double)
Executes the logic for when WristFlexExt just changed.
Declaration
private void OnWristFlexExtChanged(double oldValue, double newValue)
Parameters
| Type | Name | Description |
|---|---|---|
| double | oldValue | The previous property value that was replaced. |
| double | newValue | The new property value that was set. |
Remarks
This method is invoked right after the value of WristFlexExt is changed.
OnWristFlexExtChanging(double)
Executes the logic for when WristFlexExt is changing.
Declaration
private void OnWristFlexExtChanging(double value)
Parameters
| Type | Name | Description |
|---|---|---|
| double | value | The new property value being set. |
Remarks
This method is invoked right before the value of WristFlexExt is changed.
OnWristFlexExtChanging(double, double)
Executes the logic for when WristFlexExt is changing.
Declaration
private void OnWristFlexExtChanging(double oldValue, double newValue)
Parameters
| Type | Name | Description |
|---|---|---|
| double | oldValue | The previous property value that is being replaced. |
| double | newValue | The new property value being set. |
Remarks
This method is invoked right before the value of WristFlexExt is changed.
OnWristSupPronChanged(double)
Executes the logic for when WristSupPron just changed.
Declaration
private void OnWristSupPronChanged(double value)
Parameters
| Type | Name | Description |
|---|---|---|
| double | value | The new property value that was set. |
Remarks
This method is invoked right after the value of WristSupPron is changed.
OnWristSupPronChanged(double, double)
Executes the logic for when WristSupPron just changed.
Declaration
private void OnWristSupPronChanged(double oldValue, double newValue)
Parameters
| Type | Name | Description |
|---|---|---|
| double | oldValue | The previous property value that was replaced. |
| double | newValue | The new property value that was set. |
Remarks
This method is invoked right after the value of WristSupPron is changed.
OnWristSupPronChanging(double)
Executes the logic for when WristSupPron is changing.
Declaration
private void OnWristSupPronChanging(double value)
Parameters
| Type | Name | Description |
|---|---|---|
| double | value | The new property value being set. |
Remarks
This method is invoked right before the value of WristSupPron is changed.
OnWristSupPronChanging(double, double)
Executes the logic for when WristSupPron is changing.
Declaration
private void OnWristSupPronChanging(double oldValue, double newValue)
Parameters
| Type | Name | Description |
|---|---|---|
| double | oldValue | The previous property value that is being replaced. |
| double | newValue | The new property value being set. |
Remarks
This method is invoked right before the value of WristSupPron is changed.
OnWristUlnRadChanged(double)
Executes the logic for when WristUlnRad just changed.
Declaration
private void OnWristUlnRadChanged(double value)
Parameters
| Type | Name | Description |
|---|---|---|
| double | value | The new property value that was set. |
Remarks
This method is invoked right after the value of WristUlnRad is changed.
OnWristUlnRadChanged(double, double)
Executes the logic for when WristUlnRad just changed.
Declaration
private void OnWristUlnRadChanged(double oldValue, double newValue)
Parameters
| Type | Name | Description |
|---|---|---|
| double | oldValue | The previous property value that was replaced. |
| double | newValue | The new property value that was set. |
Remarks
This method is invoked right after the value of WristUlnRad is changed.
OnWristUlnRadChanging(double)
Executes the logic for when WristUlnRad is changing.
Declaration
private void OnWristUlnRadChanging(double value)
Parameters
| Type | Name | Description |
|---|---|---|
| double | value | The new property value being set. |
Remarks
This method is invoked right before the value of WristUlnRad is changed.
OnWristUlnRadChanging(double, double)
Executes the logic for when WristUlnRad is changing.
Declaration
private void OnWristUlnRadChanging(double oldValue, double newValue)
Parameters
| Type | Name | Description |
|---|---|---|
| double | oldValue | The previous property value that is being replaced. |
| double | newValue | The new property value being set. |
Remarks
This method is invoked right before the value of WristUlnRad is changed.
Reconnect()
Disconnects and reconnects the UDP socket.
Declaration
public void Reconnect()