Class MockUltrasoundSource
Synthetic ultrasound frame source for testing the UltrasoundClassifier pipeline without real hardware connected. Generates class-conditional grayscale patterns so an actual model can learn to distinguish them.
JSON configuration
Use these block entries inside a pipeline configuration. Input names must match other blocks in that pipeline; device addresses and file paths must match your setup.
JSON configuration:
{
"MockUltrasound": {
"Type": "MockUltrasoundSource",
"Inputs": [ "Clock" ],
"DesiredRate": 30,
"Params": [ 5, 224, 224, 0.05 ]
}
}
Params:
| Index | Description |
|---|---|
| 0 | NumClasses (int, default 5). |
| 1 | FrameHeight (int, default 224) — pixel rows. |
| 2 | FrameWidth (int, default 224) — pixel cols. |
| 3 | NoiseLevel (double, default 0.05) — std-dev of additive Gaussian noise. |
How Type, Inputs and Params work · Block catalogue and parameter reference
Implements
Inherited Members
Namespace: MOSAIC.Models.Streaming
Assembly: MOSAIC.dll
Syntax
public class MockUltrasoundSource : BaseBlock, INotifyPropertyChanged, INotifyPropertyChanging, ISubscriber, IPublisher, IBaseBlockProps, IJsonExportable, IDisposable, IAsyncDisposable
Remarks
Overview: On each clock tick, the source emits one Matrix<double>
of shape FrameHeight × FrameWidth with pixel values in [0, 1]. The
content depends on CurrentClass, an integer in
[0, NumClasses) that you can change at runtime (e.g. via a
Trigger block driving the same value).
Each class corresponds to a deterministic spatial pattern — vertical gradient,
horizontal gradient, central blob, diagonal stripes, checkerboard — plus a
small amount of Gaussian noise so the frames aren't pixel-identical between
ticks.
Source block: Driven by an upstream ClockBlock
(the tNow double timestamp is used to seed the noise).
Typical use: place a ClockBlock at 30 Hz, this source after it,
the classifier downstream, and a TriggerBuffer alongside collecting
labelled segments — the same way you'd wire real ultrasound data. Cycle
CurrentClass through values 0..NumClasses-1 to record fake
training data; train the network; verify the predictor learns the patterns.
Constructors
MockUltrasoundSource(string, double, int, int, int, double)
Declaration
public MockUltrasoundSource(string name = "MockUltrasound", double desiredRate = 30, int numClasses = 5, int frameHeight = 224, int frameWidth = 224, double noiseLevel = 0.05)
Parameters
| Type | Name | Description |
|---|---|---|
| string | name | |
| double | desiredRate | |
| int | numClasses | |
| int | frameHeight | |
| int | frameWidth | |
| double | noiseLevel |
Fields
_currentClass
Index of the synthetic class to render this tick. Settable at runtime —
drive this from a Trigger or UI slider to switch the "gesture" being
produced. Clamped to [0, NumClasses).
Declaration
[ObservableProperty]
private int _currentClass
Field Value
| Type | Description |
|---|---|
| int |
_frameCount
Total frames emitted so far (informational, for the card UI).
Declaration
[ObservableProperty]
private long _frameCount
Field Value
| Type | Description |
|---|---|
| long |
_frameHeight
Generated frame height in pixels.
Declaration
[ObservableProperty]
private int _frameHeight
Field Value
| Type | Description |
|---|---|
| int |
_frameWidth
Generated frame width in pixels.
Declaration
[ObservableProperty]
private int _frameWidth
Field Value
| Type | Description |
|---|---|
| int |
_latestWeights
Cached activation vector from the upstream weight source. Held across ticks so that frame emission can blend even when the weight source runs at a different rate than the clock (hold-last behaviour).
Declaration
private Vector<double>? _latestWeights
Field Value
| Type | Description |
|---|---|
| Vector<double> |
_noiseLevel
Std-dev of additive Gaussian noise applied to each frame.
Declaration
[ObservableProperty]
private double _noiseLevel
Field Value
| Type | Description |
|---|---|
| double |
_numClasses
Number of distinguishable synthetic classes.
Declaration
[ObservableProperty]
private int _numClasses
Field Value
| Type | Description |
|---|---|
| int |
_patterns
Per-class base pattern, precomputed once at construction. Each row of this matrix is the row-major pixel buffer for one class's template; noise is added per-frame on top of the chosen template.
Declaration
private double[][] _patterns
Field Value
| Type | Description |
|---|---|
| double[][] |
_rng
PRNG for the per-frame noise.
Declaration
private readonly Random _rng
Field Value
| Type | Description |
|---|---|
| Random |
_sweepFrequencyHz
Frequency for the internal sweep generator (Sweep).
Each channel uses sin²(2π·f·t + i·2π/N), so the channels phase-shift
around the circle and the full pattern set is exercised across one period.
Declaration
[ObservableProperty]
private double _sweepFrequencyHz
Field Value
| Type | Description |
|---|---|
| double |
_sweepStartTicks
Wall-clock anchor for the internal sweep generator.
Declaration
private readonly long _sweepStartTicks
Field Value
| Type | Description |
|---|---|
| long |
_weightSource
In weighted mode, selects which input drives the per-pattern blend: upstream Vector messages (training), manual slider values (precise testing), or an internal sine-bank generator (hands-free demo).
Declaration
[ObservableProperty]
private WeightSource _weightSource
Field Value
| Type | Description |
|---|---|
| WeightSource |
_weightedMode
When true, frame generation blends all pattern templates weighted
by the most recently received upstream activation vector
(_latestWeights) instead of selecting a single template by
CurrentClass. Useful for testing regression pipelines where
the image must be a continuous function of the regression target — e.g.
driven by a SinGenerator producing per-channel activations.
Declaration
[ObservableProperty]
private bool _weightedMode
Field Value
| Type | Description |
|---|---|
| bool |
Remarks
In weighted mode the source needs two inputs: a clock (for timing) and a Vector source (for weights). Wire the activation source as a second input alongside the clock; the block distinguishes them by message type (Vector → weight update; anything else → clock tick → emit frame).
Properties
CurrentClass
Index of the synthetic class to render this tick. Settable at runtime —
drive this from a Trigger or UI slider to switch the "gesture" being
produced. Clamped to [0, NumClasses).
Declaration
[ExcludeFromCodeCoverage]
public int CurrentClass { get; set; }
Property Value
| Type | Description |
|---|---|
| int |
DumpFilePrefix
Recordings from this block are named <block>_frames.csv.
Declaration
protected override string DumpFilePrefix { get; }
Property Value
| Type | Description |
|---|---|
| string |
Overrides
FrameCount
Total frames emitted so far (informational, for the card UI).
Declaration
[ExcludeFromCodeCoverage]
public long FrameCount { get; set; }
Property Value
| Type | Description |
|---|---|
| long |
FrameHeight
Generated frame height in pixels.
Declaration
[ExcludeFromCodeCoverage]
public int FrameHeight { get; set; }
Property Value
| Type | Description |
|---|---|
| int |
FrameWidth
Generated frame width in pixels.
Declaration
[ExcludeFromCodeCoverage]
public int FrameWidth { get; set; }
Property Value
| Type | Description |
|---|---|
| int |
JsonTypeName
Block type identifier for JSON serialization. Override for a custom name.
Declaration
protected override string JsonTypeName { get; }
Property Value
| Type | Description |
|---|---|
| string |
Overrides
ManualChannels
Per-channel manual weight items, bound to sliders in the card view when WeightSource is Manual. Resized automatically when NumClasses changes.
Declaration
public ObservableCollection<ManualChannelItem> ManualChannels { get; }
Property Value
| Type | Description |
|---|---|
| ObservableCollection<ManualChannelItem> |
NoiseLevel
Std-dev of additive Gaussian noise applied to each frame.
Declaration
[ExcludeFromCodeCoverage]
public double NoiseLevel { get; set; }
Property Value
| Type | Description |
|---|---|
| double |
NumClasses
Number of distinguishable synthetic classes.
Declaration
[ExcludeFromCodeCoverage]
public int NumClasses { get; set; }
Property Value
| Type | Description |
|---|---|
| int |
SweepFrequencyHz
Frequency for the internal sweep generator (Sweep).
Each channel uses sin²(2π·f·t + i·2π/N), so the channels phase-shift
around the circle and the full pattern set is exercised across one period.
Declaration
[ExcludeFromCodeCoverage]
public double SweepFrequencyHz { get; set; }
Property Value
| Type | Description |
|---|---|
| double |
Visualization
This block's visualization, or null when it has none.
Declaration
protected override BlockVisualization? Visualization { get; }
Property Value
| Type | Description |
|---|---|
| BlockVisualization |
Overrides
Remarks
Blocks own their scope as a public Viz property rather than inheriting one, so the
base class has no way to reach it. Overriding this is what lets the rate below be wired up
automatically. With correct publication metadata, the bundle derives the time axis for
one vector per publication or fixed-size contiguous sample packets from the feed shape.
When a plot needs a rate that publication frequency and feed shape cannot express (for
example, variable-sized packets or overlapping windows), declare it with
Viz.UpdateSignalRate. An explicit declaration wins over the derived rate. A block
with several bundles must configure each one; this hook exposes only one bundle.
Viz
Visualization scope for the generated frames.
Declaration
public BlockVisualization Viz { get; set; }
Property Value
| Type | Description |
|---|---|
| BlockVisualization |
WeightSource
In weighted mode, selects which input drives the per-pattern blend: upstream Vector messages (training), manual slider values (precise testing), or an internal sine-bank generator (hands-free demo).
Declaration
[ExcludeFromCodeCoverage]
public WeightSource WeightSource { get; set; }
Property Value
| Type | Description |
|---|---|
| WeightSource |
WeightedMode
When true, frame generation blends all pattern templates weighted
by the most recently received upstream activation vector
(_latestWeights) instead of selecting a single template by
CurrentClass. Useful for testing regression pipelines where
the image must be a continuous function of the regression target — e.g.
driven by a SinGenerator producing per-channel activations.
Declaration
[ExcludeFromCodeCoverage]
public bool WeightedMode { get; set; }
Property Value
| Type | Description |
|---|---|
| bool |
Remarks
In weighted mode the source needs two inputs: a clock (for timing) and a Vector source (for weights). Wire the activation source as a second input alongside the clock; the block distinguishes them by message type (Vector → weight update; anything else → clock tick → emit frame).
Methods
BuildTemplate(int, int)
Pick or build the base template for this frame, before noise. Label mode
returns the single template indexed by CurrentClass;
weighted mode picks a weight source — upstream Vector, manual sliders,
or internal sweep — and blends the per-class templates by those weights.
Weights are clamped to [0, 1] so the composite stays in pixel range.
Declaration
private double[]? BuildTemplate(int h, int w)
Parameters
| Type | Name | Description |
|---|---|---|
| int | h | |
| int | w |
Returns
| Type | Description |
|---|---|
| double[] |
ComputeSweepWeights()
Compute the synthetic per-channel activation vector for
Sweep mode. Each channel uses
sin²(2π·f·t + i·2π/N) so the bank sweeps with a complete phase
rotation across the channels — every two-finger and rest-only combination
appears at some point in the cycle.
Declaration
private Vector<double> ComputeSweepWeights()
Returns
| Type | Description |
|---|---|
| Vector<double> |
ConfigureInput(IServiceProvider, JsonModel)
Declaration
public static MockUltrasoundSource ConfigureInput(IServiceProvider sp, JsonModel m)
Parameters
| Type | Name | Description |
|---|---|---|
| IServiceProvider | sp | |
| JsonModel | m |
Returns
| Type | Description |
|---|---|
| MockUltrasoundSource |
Dispose()
Performs application-defined tasks associated with freeing, releasing, or resetting unmanaged resources.
Declaration
public override void Dispose()
Overrides
FillPattern(double[], int, int, int)
Fill buf (row-major, h × w) with the deterministic
pattern for class cls. Values are normalised to [0, 1].
Declaration
private static void FillPattern(double[] buf, int cls, int h, int w)
Parameters
| Type | Name | Description |
|---|---|---|
| double[] | buf | |
| int | cls | |
| int | h | |
| int | w |
GetJsonParams()
Block-specific parameters for JSON. Override to provide custom parameters.
Declaration
protected override IReadOnlyList<object>? GetJsonParams()
Returns
| Type | Description |
|---|---|
| IReadOnlyList<object> | The values for Params, in the order this block's |
Overrides
ManualWeightsAsVector()
Snapshot ManualChannels values as a Vector.
Declaration
private Vector<double> ManualWeightsAsVector()
Returns
| Type | Description |
|---|---|
| Vector<double> |
OnCurrentClassChanged(int)
Executes the logic for when CurrentClass just changed.
Declaration
private void OnCurrentClassChanged(int value)
Parameters
| Type | Name | Description |
|---|---|---|
| int | value | The new property value that was set. |
Remarks
This method is invoked right after the value of CurrentClass is changed.
OnCurrentClassChanged(int, int)
Executes the logic for when CurrentClass just changed.
Declaration
private void OnCurrentClassChanged(int oldValue, int newValue)
Parameters
| Type | Name | Description |
|---|---|---|
| int | oldValue | The previous property value that was replaced. |
| int | newValue | The new property value that was set. |
Remarks
This method is invoked right after the value of CurrentClass is changed.
OnCurrentClassChanging(int)
Executes the logic for when CurrentClass is changing.
Declaration
private void OnCurrentClassChanging(int value)
Parameters
| Type | Name | Description |
|---|---|---|
| int | value | The new property value being set. |
Remarks
This method is invoked right before the value of CurrentClass is changed.
OnCurrentClassChanging(int, int)
Executes the logic for when CurrentClass is changing.
Declaration
private void OnCurrentClassChanging(int oldValue, int newValue)
Parameters
| Type | Name | Description |
|---|---|---|
| int | oldValue | The previous property value that is being replaced. |
| int | newValue | The new property value being set. |
Remarks
This method is invoked right before the value of CurrentClass is changed.
OnFrameCountChanged(long)
Executes the logic for when FrameCount just changed.
Declaration
private void OnFrameCountChanged(long value)
Parameters
| Type | Name | Description |
|---|---|---|
| long | value | The new property value that was set. |
Remarks
This method is invoked right after the value of FrameCount is changed.
OnFrameCountChanged(long, long)
Executes the logic for when FrameCount just changed.
Declaration
private void OnFrameCountChanged(long oldValue, long newValue)
Parameters
| Type | Name | Description |
|---|---|---|
| long | oldValue | The previous property value that was replaced. |
| long | newValue | The new property value that was set. |
Remarks
This method is invoked right after the value of FrameCount is changed.
OnFrameCountChanging(long)
Executes the logic for when FrameCount is changing.
Declaration
private void OnFrameCountChanging(long value)
Parameters
| Type | Name | Description |
|---|---|---|
| long | value | The new property value being set. |
Remarks
This method is invoked right before the value of FrameCount is changed.
OnFrameCountChanging(long, long)
Executes the logic for when FrameCount is changing.
Declaration
private void OnFrameCountChanging(long oldValue, long newValue)
Parameters
| Type | Name | Description |
|---|---|---|
| long | oldValue | The previous property value that is being replaced. |
| long | newValue | The new property value being set. |
Remarks
This method is invoked right before the value of FrameCount is changed.
OnFrameHeightChanged(int)
Executes the logic for when FrameHeight just changed.
Declaration
private void OnFrameHeightChanged(int value)
Parameters
| Type | Name | Description |
|---|---|---|
| int | value | The new property value that was set. |
Remarks
This method is invoked right after the value of FrameHeight is changed.
OnFrameHeightChanged(int, int)
Executes the logic for when FrameHeight just changed.
Declaration
private void OnFrameHeightChanged(int oldValue, int newValue)
Parameters
| Type | Name | Description |
|---|---|---|
| int | oldValue | The previous property value that was replaced. |
| int | newValue | The new property value that was set. |
Remarks
This method is invoked right after the value of FrameHeight is changed.
OnFrameHeightChanging(int)
Executes the logic for when FrameHeight is changing.
Declaration
private void OnFrameHeightChanging(int value)
Parameters
| Type | Name | Description |
|---|---|---|
| int | value | The new property value being set. |
Remarks
This method is invoked right before the value of FrameHeight is changed.
OnFrameHeightChanging(int, int)
Executes the logic for when FrameHeight is changing.
Declaration
private void OnFrameHeightChanging(int oldValue, int newValue)
Parameters
| Type | Name | Description |
|---|---|---|
| int | oldValue | The previous property value that is being replaced. |
| int | newValue | The new property value being set. |
Remarks
This method is invoked right before the value of FrameHeight is changed.
OnFrameWidthChanged(int)
Executes the logic for when FrameWidth just changed.
Declaration
private void OnFrameWidthChanged(int value)
Parameters
| Type | Name | Description |
|---|---|---|
| int | value | The new property value that was set. |
Remarks
This method is invoked right after the value of FrameWidth is changed.
OnFrameWidthChanged(int, int)
Executes the logic for when FrameWidth just changed.
Declaration
private void OnFrameWidthChanged(int oldValue, int newValue)
Parameters
| Type | Name | Description |
|---|---|---|
| int | oldValue | The previous property value that was replaced. |
| int | newValue | The new property value that was set. |
Remarks
This method is invoked right after the value of FrameWidth is changed.
OnFrameWidthChanging(int)
Executes the logic for when FrameWidth is changing.
Declaration
private void OnFrameWidthChanging(int value)
Parameters
| Type | Name | Description |
|---|---|---|
| int | value | The new property value being set. |
Remarks
This method is invoked right before the value of FrameWidth is changed.
OnFrameWidthChanging(int, int)
Executes the logic for when FrameWidth is changing.
Declaration
private void OnFrameWidthChanging(int oldValue, int newValue)
Parameters
| Type | Name | Description |
|---|---|---|
| int | oldValue | The previous property value that is being replaced. |
| int | newValue | The new property value being set. |
Remarks
This method is invoked right before the value of FrameWidth is changed.
OnNoiseLevelChanged(double)
Executes the logic for when NoiseLevel just changed.
Declaration
private void OnNoiseLevelChanged(double value)
Parameters
| Type | Name | Description |
|---|---|---|
| double | value | The new property value that was set. |
Remarks
This method is invoked right after the value of NoiseLevel is changed.
OnNoiseLevelChanged(double, double)
Executes the logic for when NoiseLevel just changed.
Declaration
private void OnNoiseLevelChanged(double oldValue, double newValue)
Parameters
| Type | Name | Description |
|---|---|---|
| double | oldValue | The previous property value that was replaced. |
| double | newValue | The new property value that was set. |
Remarks
This method is invoked right after the value of NoiseLevel is changed.
OnNoiseLevelChanging(double)
Executes the logic for when NoiseLevel is changing.
Declaration
private void OnNoiseLevelChanging(double value)
Parameters
| Type | Name | Description |
|---|---|---|
| double | value | The new property value being set. |
Remarks
This method is invoked right before the value of NoiseLevel is changed.
OnNoiseLevelChanging(double, double)
Executes the logic for when NoiseLevel is changing.
Declaration
private void OnNoiseLevelChanging(double oldValue, double newValue)
Parameters
| Type | Name | Description |
|---|---|---|
| double | oldValue | The previous property value that is being replaced. |
| double | newValue | The new property value being set. |
Remarks
This method is invoked right before the value of NoiseLevel is changed.
OnNumClassesChanged(int)
Executes the logic for when NumClasses just changed.
Declaration
private void OnNumClassesChanged(int value)
Parameters
| Type | Name | Description |
|---|---|---|
| int | value | The new property value that was set. |
Remarks
This method is invoked right after the value of NumClasses is changed.
OnNumClassesChanged(int, int)
Executes the logic for when NumClasses just changed.
Declaration
private void OnNumClassesChanged(int oldValue, int newValue)
Parameters
| Type | Name | Description |
|---|---|---|
| int | oldValue | The previous property value that was replaced. |
| int | newValue | The new property value that was set. |
Remarks
This method is invoked right after the value of NumClasses is changed.
OnNumClassesChanging(int)
Executes the logic for when NumClasses is changing.
Declaration
private void OnNumClassesChanging(int value)
Parameters
| Type | Name | Description |
|---|---|---|
| int | value | The new property value being set. |
Remarks
This method is invoked right before the value of NumClasses is changed.
OnNumClassesChanging(int, int)
Executes the logic for when NumClasses is changing.
Declaration
private void OnNumClassesChanging(int oldValue, int newValue)
Parameters
| Type | Name | Description |
|---|---|---|
| int | oldValue | The previous property value that is being replaced. |
| int | newValue | The new property value being set. |
Remarks
This method is invoked right before the value of NumClasses is changed.
OnReceive(object, object)
Routes incoming messages:
-
Vector<double>→ cache as the latest activation weights for weighted mode. Does not trigger a frame emission — the clock drives that. Useful when the weight source's rate doesn't match the clock's; the cache acts as hold-last interpolation. -
Anything else (typically a clock tick —
doubletimestamp) → emit one frame using the current mode's blending rule.
Declaration
protected override void OnReceive(object sender, object data)
Parameters
| Type | Name | Description |
|---|---|---|
| object | sender | |
| object | data |
Overrides
OnSweepFrequencyHzChanged(double)
Executes the logic for when SweepFrequencyHz just changed.
Declaration
private void OnSweepFrequencyHzChanged(double value)
Parameters
| Type | Name | Description |
|---|---|---|
| double | value | The new property value that was set. |
Remarks
This method is invoked right after the value of SweepFrequencyHz is changed.
OnSweepFrequencyHzChanged(double, double)
Executes the logic for when SweepFrequencyHz just changed.
Declaration
private void OnSweepFrequencyHzChanged(double oldValue, double newValue)
Parameters
| Type | Name | Description |
|---|---|---|
| double | oldValue | The previous property value that was replaced. |
| double | newValue | The new property value that was set. |
Remarks
This method is invoked right after the value of SweepFrequencyHz is changed.
OnSweepFrequencyHzChanging(double)
Executes the logic for when SweepFrequencyHz is changing.
Declaration
private void OnSweepFrequencyHzChanging(double value)
Parameters
| Type | Name | Description |
|---|---|---|
| double | value | The new property value being set. |
Remarks
This method is invoked right before the value of SweepFrequencyHz is changed.
OnSweepFrequencyHzChanging(double, double)
Executes the logic for when SweepFrequencyHz is changing.
Declaration
private void OnSweepFrequencyHzChanging(double oldValue, double newValue)
Parameters
| Type | Name | Description |
|---|---|---|
| double | oldValue | The previous property value that is being replaced. |
| double | newValue | The new property value being set. |
Remarks
This method is invoked right before the value of SweepFrequencyHz is changed.
OnWeightSourceChanged(WeightSource)
Executes the logic for when WeightSource just changed.
Declaration
private void OnWeightSourceChanged(WeightSource value)
Parameters
| Type | Name | Description |
|---|---|---|
| WeightSource | value | The new property value that was set. |
Remarks
This method is invoked right after the value of WeightSource is changed.
OnWeightSourceChanged(WeightSource, WeightSource)
Executes the logic for when WeightSource just changed.
Declaration
private void OnWeightSourceChanged(WeightSource oldValue, WeightSource newValue)
Parameters
| Type | Name | Description |
|---|---|---|
| WeightSource | oldValue | The previous property value that was replaced. |
| WeightSource | newValue | The new property value that was set. |
Remarks
This method is invoked right after the value of WeightSource is changed.
OnWeightSourceChanging(WeightSource)
Executes the logic for when WeightSource is changing.
Declaration
private void OnWeightSourceChanging(WeightSource value)
Parameters
| Type | Name | Description |
|---|---|---|
| WeightSource | value | The new property value being set. |
Remarks
This method is invoked right before the value of WeightSource is changed.
OnWeightSourceChanging(WeightSource, WeightSource)
Executes the logic for when WeightSource is changing.
Declaration
private void OnWeightSourceChanging(WeightSource oldValue, WeightSource newValue)
Parameters
| Type | Name | Description |
|---|---|---|
| WeightSource | oldValue | The previous property value that is being replaced. |
| WeightSource | newValue | The new property value being set. |
Remarks
This method is invoked right before the value of WeightSource is changed.
OnWeightedModeChanged(bool)
Executes the logic for when WeightedMode just changed.
Declaration
private void OnWeightedModeChanged(bool value)
Parameters
| Type | Name | Description |
|---|---|---|
| bool | value | The new property value that was set. |
Remarks
This method is invoked right after the value of WeightedMode is changed.
OnWeightedModeChanged(bool, bool)
Executes the logic for when WeightedMode just changed.
Declaration
private void OnWeightedModeChanged(bool oldValue, bool newValue)
Parameters
| Type | Name | Description |
|---|---|---|
| bool | oldValue | The previous property value that was replaced. |
| bool | newValue | The new property value that was set. |
Remarks
This method is invoked right after the value of WeightedMode is changed.
OnWeightedModeChanging(bool)
Executes the logic for when WeightedMode is changing.
Declaration
private void OnWeightedModeChanging(bool value)
Parameters
| Type | Name | Description |
|---|---|---|
| bool | value | The new property value being set. |
Remarks
This method is invoked right before the value of WeightedMode is changed.
OnWeightedModeChanging(bool, bool)
Executes the logic for when WeightedMode is changing.
Declaration
private void OnWeightedModeChanging(bool oldValue, bool newValue)
Parameters
| Type | Name | Description |
|---|---|---|
| bool | oldValue | The previous property value that is being replaced. |
| bool | newValue | The new property value being set. |
Remarks
This method is invoked right before the value of WeightedMode is changed.
RebuildManualChannels()
Resize ManualChannels to match NumClasses, preserving the current values where indices overlap. New entries are added at zero so a "Manual" override doesn't suddenly flash a channel to active when NumClasses grows.
Declaration
private void RebuildManualChannels()
RebuildPatterns()
Precompute one grayscale template per class. Six patterns are defined; if NumClasses exceeds six, additional classes are generated by varying the diagonal stripe period — they remain deterministic and distinguishable.
Declaration
private void RebuildPatterns()