Class TAC
Target Achievement Control (TAC) test block.
JSON configuration
Use these block entries inside a pipeline configuration. Input names must match other blocks in that pipeline; device addresses and file paths must match your setup.
JSON configuration:
{
"TAC": {
"Type": "TAC",
"Inputs": [ "Stimulus", "Predictor" ],
"Params": [ "Stimulus", 2.0, 0.15 ]
}
}
Params:
| Index | Description |
|---|---|
| 0 | StimulusBlockName (string) — name of the Stimulus block to bind to. |
| 1 | DwellTime (double, default 2.0) — required continuous hold duration in seconds. |
| 2 | SuccessThreshold (double, default 0.2) — maximum L2 distance to count as "in target". |
How Type, Inputs and Params work · Block catalogue and parameter reference
Implements
Inherited Members
Namespace: MOSAIC.Models.Tests
Assembly: MOSAIC.dll
Syntax
public sealed class TAC : BaseBlock, INotifyPropertyChanged, INotifyPropertyChanging, ISubscriber, IPublisher, IBaseBlockProps, IJsonExportable, IDisposable, IAsyncDisposable
Remarks
Reference: Simon et al. 2011 — https://pmc.ncbi.nlm.nih.gov/articles/PMC4232230/.
Overview: Evaluates a user's ability to reach target postures by computing L2 distance between prediction and target on each tick. A DwellDetector tracks whether the distance stays below threshold for the required dwell time. Trial-level and aggregate metrics are managed by TACResults.
Inputs: Requires exactly two upstream connections:
- A Stimulus block — provides target vectors and FSM
state via
(string, Vector<double>)tuples. - A prediction source (e.g.
IncrementalPredictor) — provides
Vector<double>predictions.
Results: Trial-level and aggregate metrics are managed by the companion TACResults class, accessible via Results. Use ExportCsv() for full trial-level export.
Stimulus binding: The pipeline builder must call BindStimulus(Stimulus) after all blocks are constructed. Auto-binding is attempted if the sender is a Stimulus instance.
Constructors
TAC(string, double, string, double, double)
Initializes a new TAC block.
Declaration
public TAC(string name, double desiredRate, string stimulusBlockName, double dwellTime = 2, double successThreshold = 0.2)
Parameters
| Type | Name | Description |
|---|---|---|
| string | name | Display name. |
| double | desiredRate | Processing rate in Hz (typically inherited). |
| string | stimulusBlockName | Name of the Stimulus block to bind to. |
| double | dwellTime | Required continuous hold duration in seconds. |
| double | successThreshold | Maximum L2 distance for target achievement. |
Fields
_clock
High-resolution stopwatch for trial timing.
Declaration
private readonly Stopwatch _clock
Field Value
| Type | Description |
|---|---|
| Stopwatch |
_currentOvershootCount
Overshoot count for the current trial.
Declaration
[ObservableProperty]
private int _currentOvershootCount
Field Value
| Type | Description |
|---|---|
| int |
_currentTaskName
Name of the current task (from the Stimulus).
Declaration
[ObservableProperty]
private string _currentTaskName
Field Value
| Type | Description |
|---|---|
| string |
_currentTrialTaskName
Task name of the current trial.
Declaration
private string _currentTrialTaskName
Field Value
| Type | Description |
|---|---|
| string |
_distanceToTarget
Current L2 distance between prediction and target.
Declaration
[ObservableProperty]
private double _distanceToTarget
Field Value
| Type | Description |
|---|---|
| double |
_dwell
Dwell-time state machine tracking hold duration and overshoots.
Declaration
private readonly DwellDetector _dwell
Field Value
| Type | Description |
|---|---|
| DwellDetector |
_evaluateCount
Total number of Evaluate() calls (for diagnostic throttling).
Declaration
private int _evaluateCount
Field Value
| Type | Description |
|---|---|
| int |
_holdProgress
Hold progress towards dwell time [0, 1].
Declaration
[ObservableProperty]
private double _holdProgress
Field Value
| Type | Description |
|---|---|
| double |
_isTrying
Whether the user is actively attempting to reach the target.
Declaration
[ObservableProperty]
private bool _isTrying
Field Value
| Type | Description |
|---|---|
| bool |
_lastReceivedState
Last FSM state received from the data stream.
Declaration
private string _lastReceivedState
Field Value
| Type | Description |
|---|---|
| string |
_lastStimulusState
Previous Stimulus FSM state (for transition detection).
Declaration
private string _lastStimulusState
Field Value
| Type | Description |
|---|---|
| string |
_prediction
Current prediction vector from the upstream predictor.
Declaration
private Vector<double>? _prediction
Field Value
| Type | Description |
|---|---|
| Vector<double> |
_prevPrediction
Previous prediction vector (for path length computation).
Declaration
private Vector<double>? _prevPrediction
Field Value
| Type | Description |
|---|---|
| Vector<double> |
_stimulus
Bound Stimulus block reference (set via BindStimulus(Stimulus)).
Declaration
private Stimulus? _stimulus
Field Value
| Type | Description |
|---|---|
| Stimulus |
_stimulusBlockName
Name of the Stimulus block to bind to.
Declaration
private readonly string _stimulusBlockName
Field Value
| Type | Description |
|---|---|
| string |
_stimulusState
Current Stimulus FSM state.
Declaration
[ObservableProperty]
private string _stimulusState
Field Value
| Type | Description |
|---|---|
| string |
_target
Current target vector from the Stimulus.
Declaration
private Vector<double>? _target
Field Value
| Type | Description |
|---|---|
| Vector<double> |
_timeInTarget
Continuous time spent within the success threshold.
Declaration
[ObservableProperty]
private double _timeInTarget
Field Value
| Type | Description |
|---|---|
| double |
_trialActive
Whether a trial is currently active.
Declaration
private bool _trialActive
Field Value
| Type | Description |
|---|---|
| bool |
_trialElapsed
Elapsed time since the current trial started.
Declaration
[ObservableProperty]
private double _trialElapsed
Field Value
| Type | Description |
|---|---|
| double |
_trialInitialDistance
Initial L2 distance at trial start.
Declaration
private double _trialInitialDistance
Field Value
| Type | Description |
|---|---|
| double |
_trialPathLength
Cumulative path length for the current trial.
Declaration
private double _trialPathLength
Field Value
| Type | Description |
|---|---|
| double |
_trialStartTime
Timestamp when the current trial started.
Declaration
private double _trialStartTime
Field Value
| Type | Description |
|---|---|
| double |
_viz
Visualization bundle. Set by the ViewModel.
Declaration
private BlockVisualization? _viz
Field Value
| Type | Description |
|---|---|
| BlockVisualization |
Properties
CurrentOvershootCount
Overshoot count for the current trial.
Declaration
[ExcludeFromCodeCoverage]
public int CurrentOvershootCount { get; set; }
Property Value
| Type | Description |
|---|---|
| int |
CurrentTaskName
Name of the current task (from the Stimulus).
Declaration
[ExcludeFromCodeCoverage]
public string CurrentTaskName { get; set; }
Property Value
| Type | Description |
|---|---|
| string |
DistanceToTarget
Current L2 distance between prediction and target.
Declaration
[ExcludeFromCodeCoverage]
public double DistanceToTarget { get; set; }
Property Value
| Type | Description |
|---|---|
| double |
DwellTime
Required continuous hold duration in seconds.
Declaration
public double DwellTime { get; }
Property Value
| Type | Description |
|---|---|
| double |
HoldProgress
Hold progress towards dwell time [0, 1].
Declaration
[ExcludeFromCodeCoverage]
public double HoldProgress { get; set; }
Property Value
| Type | Description |
|---|---|
| double |
IsTrying
Whether the user is actively attempting to reach the target.
Declaration
[ExcludeFromCodeCoverage]
public bool IsTrying { get; set; }
Property Value
| Type | Description |
|---|---|
| bool |
JsonTypeName
Block type identifier for JSON serialization. Override for a custom name.
Declaration
protected override string JsonTypeName { get; }
Property Value
| Type | Description |
|---|---|
| string |
Overrides
MaxInputs
Needs exactly two inputs (e.g. a data stream + a Trigger/TriggerBuffer).
Declaration
public override int MaxInputs { get; }
Property Value
| Type | Description |
|---|---|
| int |
Overrides
MinInputs
Needs exactly two inputs (e.g. a data stream + a Trigger/TriggerBuffer).
Declaration
public override int MinInputs { get; }
Property Value
| Type | Description |
|---|---|
| int |
Overrides
Results
Trial-level and aggregate metrics. Bind in the ViewModel for UI display and use ExportCsv() for export.
Declaration
public TACResults Results { get; }
Property Value
| Type | Description |
|---|---|
| TACResults |
StimulusBlockName
Name of the Stimulus block to bind to (for pipeline builder).
Declaration
public string StimulusBlockName { get; }
Property Value
| Type | Description |
|---|---|
| string |
StimulusState
Current Stimulus FSM state.
Declaration
[ExcludeFromCodeCoverage]
public string StimulusState { get; set; }
Property Value
| Type | Description |
|---|---|
| string |
SuccessThreshold
Maximum L2 distance to count as "in target".
Declaration
public double SuccessThreshold { get; }
Property Value
| Type | Description |
|---|---|
| double |
TimeInTarget
Continuous time spent within the success threshold.
Declaration
[ExcludeFromCodeCoverage]
public double TimeInTarget { get; set; }
Property Value
| Type | Description |
|---|---|
| double |
TrialElapsed
Elapsed time since the current trial started.
Declaration
[ExcludeFromCodeCoverage]
public double TrialElapsed { get; set; }
Property Value
| Type | Description |
|---|---|
| double |
Visualization
This block's visualization, or null when it has none.
Declaration
protected override BlockVisualization? Visualization { get; }
Property Value
| Type | Description |
|---|---|
| BlockVisualization |
Overrides
Remarks
Blocks own their scope as a public Viz property rather than inheriting one, so the
base class has no way to reach it. Overriding this is what lets the rate below be wired up
automatically. With correct publication metadata, the bundle derives the time axis for
one vector per publication or fixed-size contiguous sample packets from the feed shape.
When a plot needs a rate that publication frequency and feed shape cannot express (for
example, variable-sized packets or overlapping windows), declare it with
Viz.UpdateSignalRate. An explicit declaration wins over the derived rate. A block
with several bundles must configure each one; this hook exposes only one bundle.
Viz
Live plot for this block. Assigned by the ViewModel, which owns the scope.
Declaration
public BlockVisualization? Viz { get; set; }
Property Value
| Type | Description |
|---|---|
| BlockVisualization |
Remarks
Setting this re-pushes the publish rate: the rate is normally pushed when it changes, which for these blocks happens during construction — before the ViewModel has handed over the scope — so without this the scope would never learn its time base.
Methods
BindStimulus(Stimulus)
Binds the TAC to a Stimulus block. Must be called by the pipeline builder after all blocks are constructed. Without this, trial detection will not work.
Declaration
public void BindStimulus(Stimulus stimulus)
Parameters
| Type | Name | Description |
|---|---|---|
| Stimulus | stimulus | The Stimulus block instance. |
Exceptions
| Type | Condition |
|---|---|
| ArgumentNullException | Thrown if |
CompleteTrialFailure()
Records a failed trial when the Stimulus leaves "capture" before dwell completion.
Declaration
private void CompleteTrialFailure()
CompleteTrialSuccess(double)
Records a successful trial, plays a beep, and advances the Stimulus FSM to "fall".
Declaration
private void CompleteTrialSuccess(double completionTime)
Parameters
| Type | Name | Description |
|---|---|---|
| double | completionTime |
ConfigureInput(IServiceProvider, JsonModel)
Creates a TAC from a JSON pipeline definition.
Declaration
public static TAC ConfigureInput(IServiceProvider sp, JsonModel m)
Parameters
| Type | Name | Description |
|---|---|---|
| IServiceProvider | sp | Service provider for dependency injection. |
| JsonModel | m | JSON model. See the class-level example for |
Returns
| Type | Description |
|---|---|
| TAC | A configured TAC instance. |
Exceptions
| Type | Condition |
|---|---|
| ArgumentException | Thrown if required parameters are missing. |
Dispose()
Unbinds the Stimulus, disposes visualization, and releases base class resources.
Declaration
public override void Dispose()
Overrides
Evaluate()
Computes L2 distance, delegates dwell tracking to DwellDetector, and detects trial boundaries from Stimulus FSM state transitions.
Declaration
private void Evaluate()
GetJsonParams()
Block-specific parameters for JSON. Override to provide custom parameters.
Declaration
protected override IReadOnlyList<object>? GetJsonParams()
Returns
| Type | Description |
|---|---|
| IReadOnlyList<object> | The values for Params, in the order this block's |
Overrides
HandleStateTransition(string, double)
Routes state transitions to StartTrial(double) or CompleteTrialFailure().
Declaration
private void HandleStateTransition(string newState, double now)
Parameters
| Type | Name | Description |
|---|---|---|
| string | newState | |
| double | now |
OnCurrentOvershootCountChanged(int)
Executes the logic for when CurrentOvershootCount just changed.
Declaration
private void OnCurrentOvershootCountChanged(int value)
Parameters
| Type | Name | Description |
|---|---|---|
| int | value | The new property value that was set. |
Remarks
This method is invoked right after the value of CurrentOvershootCount is changed.
OnCurrentOvershootCountChanged(int, int)
Executes the logic for when CurrentOvershootCount just changed.
Declaration
private void OnCurrentOvershootCountChanged(int oldValue, int newValue)
Parameters
| Type | Name | Description |
|---|---|---|
| int | oldValue | The previous property value that was replaced. |
| int | newValue | The new property value that was set. |
Remarks
This method is invoked right after the value of CurrentOvershootCount is changed.
OnCurrentOvershootCountChanging(int)
Executes the logic for when CurrentOvershootCount is changing.
Declaration
private void OnCurrentOvershootCountChanging(int value)
Parameters
| Type | Name | Description |
|---|---|---|
| int | value | The new property value being set. |
Remarks
This method is invoked right before the value of CurrentOvershootCount is changed.
OnCurrentOvershootCountChanging(int, int)
Executes the logic for when CurrentOvershootCount is changing.
Declaration
private void OnCurrentOvershootCountChanging(int oldValue, int newValue)
Parameters
| Type | Name | Description |
|---|---|---|
| int | oldValue | The previous property value that is being replaced. |
| int | newValue | The new property value being set. |
Remarks
This method is invoked right before the value of CurrentOvershootCount is changed.
OnCurrentTaskNameChanged(string)
Executes the logic for when CurrentTaskName just changed.
Declaration
private void OnCurrentTaskNameChanged(string value)
Parameters
| Type | Name | Description |
|---|---|---|
| string | value | The new property value that was set. |
Remarks
This method is invoked right after the value of CurrentTaskName is changed.
OnCurrentTaskNameChanged(string?, string)
Executes the logic for when CurrentTaskName just changed.
Declaration
private void OnCurrentTaskNameChanged(string? oldValue, string newValue)
Parameters
| Type | Name | Description |
|---|---|---|
| string | oldValue | The previous property value that was replaced. |
| string | newValue | The new property value that was set. |
Remarks
This method is invoked right after the value of CurrentTaskName is changed.
OnCurrentTaskNameChanging(string)
Executes the logic for when CurrentTaskName is changing.
Declaration
private void OnCurrentTaskNameChanging(string value)
Parameters
| Type | Name | Description |
|---|---|---|
| string | value | The new property value being set. |
Remarks
This method is invoked right before the value of CurrentTaskName is changed.
OnCurrentTaskNameChanging(string?, string)
Executes the logic for when CurrentTaskName is changing.
Declaration
private void OnCurrentTaskNameChanging(string? oldValue, string newValue)
Parameters
| Type | Name | Description |
|---|---|---|
| string | oldValue | The previous property value that is being replaced. |
| string | newValue | The new property value being set. |
Remarks
This method is invoked right before the value of CurrentTaskName is changed.
OnDistanceToTargetChanged(double)
Executes the logic for when DistanceToTarget just changed.
Declaration
private void OnDistanceToTargetChanged(double value)
Parameters
| Type | Name | Description |
|---|---|---|
| double | value | The new property value that was set. |
Remarks
This method is invoked right after the value of DistanceToTarget is changed.
OnDistanceToTargetChanged(double, double)
Executes the logic for when DistanceToTarget just changed.
Declaration
private void OnDistanceToTargetChanged(double oldValue, double newValue)
Parameters
| Type | Name | Description |
|---|---|---|
| double | oldValue | The previous property value that was replaced. |
| double | newValue | The new property value that was set. |
Remarks
This method is invoked right after the value of DistanceToTarget is changed.
OnDistanceToTargetChanging(double)
Executes the logic for when DistanceToTarget is changing.
Declaration
private void OnDistanceToTargetChanging(double value)
Parameters
| Type | Name | Description |
|---|---|---|
| double | value | The new property value being set. |
Remarks
This method is invoked right before the value of DistanceToTarget is changed.
OnDistanceToTargetChanging(double, double)
Executes the logic for when DistanceToTarget is changing.
Declaration
private void OnDistanceToTargetChanging(double oldValue, double newValue)
Parameters
| Type | Name | Description |
|---|---|---|
| double | oldValue | The previous property value that is being replaced. |
| double | newValue | The new property value being set. |
Remarks
This method is invoked right before the value of DistanceToTarget is changed.
OnHoldProgressChanged(double)
Executes the logic for when HoldProgress just changed.
Declaration
private void OnHoldProgressChanged(double value)
Parameters
| Type | Name | Description |
|---|---|---|
| double | value | The new property value that was set. |
Remarks
This method is invoked right after the value of HoldProgress is changed.
OnHoldProgressChanged(double, double)
Executes the logic for when HoldProgress just changed.
Declaration
private void OnHoldProgressChanged(double oldValue, double newValue)
Parameters
| Type | Name | Description |
|---|---|---|
| double | oldValue | The previous property value that was replaced. |
| double | newValue | The new property value that was set. |
Remarks
This method is invoked right after the value of HoldProgress is changed.
OnHoldProgressChanging(double)
Executes the logic for when HoldProgress is changing.
Declaration
private void OnHoldProgressChanging(double value)
Parameters
| Type | Name | Description |
|---|---|---|
| double | value | The new property value being set. |
Remarks
This method is invoked right before the value of HoldProgress is changed.
OnHoldProgressChanging(double, double)
Executes the logic for when HoldProgress is changing.
Declaration
private void OnHoldProgressChanging(double oldValue, double newValue)
Parameters
| Type | Name | Description |
|---|---|---|
| double | oldValue | The previous property value that is being replaced. |
| double | newValue | The new property value being set. |
Remarks
This method is invoked right before the value of HoldProgress is changed.
OnIsTryingChanged(bool)
Executes the logic for when IsTrying just changed.
Declaration
private void OnIsTryingChanged(bool value)
Parameters
| Type | Name | Description |
|---|---|---|
| bool | value | The new property value that was set. |
Remarks
This method is invoked right after the value of IsTrying is changed.
OnIsTryingChanged(bool, bool)
Executes the logic for when IsTrying just changed.
Declaration
private void OnIsTryingChanged(bool oldValue, bool newValue)
Parameters
| Type | Name | Description |
|---|---|---|
| bool | oldValue | The previous property value that was replaced. |
| bool | newValue | The new property value that was set. |
Remarks
This method is invoked right after the value of IsTrying is changed.
OnIsTryingChanging(bool)
Executes the logic for when IsTrying is changing.
Declaration
private void OnIsTryingChanging(bool value)
Parameters
| Type | Name | Description |
|---|---|---|
| bool | value | The new property value being set. |
Remarks
This method is invoked right before the value of IsTrying is changed.
OnIsTryingChanging(bool, bool)
Executes the logic for when IsTrying is changing.
Declaration
private void OnIsTryingChanging(bool oldValue, bool newValue)
Parameters
| Type | Name | Description |
|---|---|---|
| bool | oldValue | The previous property value that is being replaced. |
| bool | newValue | The new property value being set. |
Remarks
This method is invoked right before the value of IsTrying is changed.
OnReceive(object, object)
Dispatches incoming data: Stimulus inputs provide targets, other inputs provide predictions. Evaluation runs whenever both target and prediction are available.
Declaration
protected override void OnReceive(object sender, object data)
Parameters
| Type | Name | Description |
|---|---|---|
| object | sender | The upstream block. |
| object | data | A |
Overrides
OnStimulusCompleted()
Logs summary when the Stimulus finishes all tasks.
Declaration
private void OnStimulusCompleted()
OnStimulusStateChanged(string)
Executes the logic for when StimulusState just changed.
Declaration
private void OnStimulusStateChanged(string value)
Parameters
| Type | Name | Description |
|---|---|---|
| string | value | The new property value that was set. |
Remarks
This method is invoked right after the value of StimulusState is changed.
OnStimulusStateChanged(string?, string)
Executes the logic for when StimulusState just changed.
Declaration
private void OnStimulusStateChanged(string? oldValue, string newValue)
Parameters
| Type | Name | Description |
|---|---|---|
| string | oldValue | The previous property value that was replaced. |
| string | newValue | The new property value that was set. |
Remarks
This method is invoked right after the value of StimulusState is changed.
OnStimulusStateChanging(string)
Executes the logic for when StimulusState is changing.
Declaration
private void OnStimulusStateChanging(string value)
Parameters
| Type | Name | Description |
|---|---|---|
| string | value | The new property value being set. |
Remarks
This method is invoked right before the value of StimulusState is changed.
OnStimulusStateChanging(string?, string)
Executes the logic for when StimulusState is changing.
Declaration
private void OnStimulusStateChanging(string? oldValue, string newValue)
Parameters
| Type | Name | Description |
|---|---|---|
| string | oldValue | The previous property value that is being replaced. |
| string | newValue | The new property value being set. |
Remarks
This method is invoked right before the value of StimulusState is changed.
OnTimeInTargetChanged(double)
Executes the logic for when TimeInTarget just changed.
Declaration
private void OnTimeInTargetChanged(double value)
Parameters
| Type | Name | Description |
|---|---|---|
| double | value | The new property value that was set. |
Remarks
This method is invoked right after the value of TimeInTarget is changed.
OnTimeInTargetChanged(double, double)
Executes the logic for when TimeInTarget just changed.
Declaration
private void OnTimeInTargetChanged(double oldValue, double newValue)
Parameters
| Type | Name | Description |
|---|---|---|
| double | oldValue | The previous property value that was replaced. |
| double | newValue | The new property value that was set. |
Remarks
This method is invoked right after the value of TimeInTarget is changed.
OnTimeInTargetChanging(double)
Executes the logic for when TimeInTarget is changing.
Declaration
private void OnTimeInTargetChanging(double value)
Parameters
| Type | Name | Description |
|---|---|---|
| double | value | The new property value being set. |
Remarks
This method is invoked right before the value of TimeInTarget is changed.
OnTimeInTargetChanging(double, double)
Executes the logic for when TimeInTarget is changing.
Declaration
private void OnTimeInTargetChanging(double oldValue, double newValue)
Parameters
| Type | Name | Description |
|---|---|---|
| double | oldValue | The previous property value that is being replaced. |
| double | newValue | The new property value being set. |
Remarks
This method is invoked right before the value of TimeInTarget is changed.
OnTrialElapsedChanged(double)
Executes the logic for when TrialElapsed just changed.
Declaration
private void OnTrialElapsedChanged(double value)
Parameters
| Type | Name | Description |
|---|---|---|
| double | value | The new property value that was set. |
Remarks
This method is invoked right after the value of TrialElapsed is changed.
OnTrialElapsedChanged(double, double)
Executes the logic for when TrialElapsed just changed.
Declaration
private void OnTrialElapsedChanged(double oldValue, double newValue)
Parameters
| Type | Name | Description |
|---|---|---|
| double | oldValue | The previous property value that was replaced. |
| double | newValue | The new property value that was set. |
Remarks
This method is invoked right after the value of TrialElapsed is changed.
OnTrialElapsedChanging(double)
Executes the logic for when TrialElapsed is changing.
Declaration
private void OnTrialElapsedChanging(double value)
Parameters
| Type | Name | Description |
|---|---|---|
| double | value | The new property value being set. |
Remarks
This method is invoked right before the value of TrialElapsed is changed.
OnTrialElapsedChanging(double, double)
Executes the logic for when TrialElapsed is changing.
Declaration
private void OnTrialElapsedChanging(double oldValue, double newValue)
Parameters
| Type | Name | Description |
|---|---|---|
| double | oldValue | The previous property value that is being replaced. |
| double | newValue | The new property value being set. |
Remarks
This method is invoked right before the value of TrialElapsed is changed.
ResetTrialUI()
Resets observable UI properties between trials.
Declaration
private void ResetTrialUI()
StartTrial(double)
Initialises per-trial state when the Stimulus enters "capture".
Declaration
private void StartTrial(double now)
Parameters
| Type | Name | Description |
|---|---|---|
| double | now |
Events
OnEvaluation
Fired on each evaluation tick (distance, timeInTarget, inTarget).
Declaration
public event Action<double, double, bool>? OnEvaluation
Event Type
| Type | Description |
|---|---|
| Action<double, double, bool> |
OnTrialCompleted
Fired when a trial completes (success, completionTime, efficiency, overshoots).
Declaration
public event Action<bool, double, double, int>? OnTrialCompleted
Event Type
| Type | Description |
|---|---|
| Action<bool, double, double, int> |